5th Stage GAC + Alkaline Filter (5 Stage Purification) Option 3
Well Pure

5th Stage GAC + Alkaline Filter (5 Stage Purification) Option 3

Tax included.

5th Stage - The Granular Activated Carbon (GAC) and alkaline filter finishes the purified water and changes the pH value from acidic (the pH of purified water is normally 6.5 depending upon the pH of the supply water) to alkaline with a pH of approximately 8.5 depending upon the pH of the supply water. Alternatively this filter can be fitted as a 6th stage (WLP11)

5th Stage filter for the 5 stage purification system.
Option 1 - carbon filter (WLP6) for final finishing of water prior to dispensing - standard setup.
Option 2 - mineral filter (WLP13) helps add back minerals to the purified water prior to dispensing.
Option 3 - Granular Activated Carbon (GAC) and alkaline filter (WLP12) finishes the purified water and changes the pH value from acidic (the pH of purified water is normally 6.5 depending upon the pH of the supply water) to alkaline with a pH of approximately 8.5 depending upon the pH of the supply water.
Option 4 - mixed ion exchange bed deionizing filter which makes the water suitable for autoclave systems and laboratory applications.

Machines this filter can be used in

  • #

    5 Stage Reverse Osmosis purification system

    Reverse osmosis water purification is different to water filtration because it leaves you with pure water. This reverse osmosis system removes impurities including bacteria, viruses, hormones, chemicals and other impurities. The onboard computer system monitors any impurities in parts per million (ppm) and if the level of impurities increases then it is time to change filters (or the filter change alarm will remind you). The recommended filter change intervals are only a guide, the actual interval will depend upon the contamination levels of your tap water supply. The purified water is stored in a pressure tank ready to dispense via an inbuilt faucet and you can also connect to a faucet at your sink and your refrigerator.